A view in Garbutt, Townsville, home to the airport and an industrial estate

Garbutt

Photo: Bgtips1001, CC BY-SA 4.0, via Wikimedia Commons

Working or living in Garbutt and need an auto electrician? Garbutt is home to Townsville Airport and RAAF Base Townsville, with an industrial estate along Duckworth Street, so fleet vehicles, utes and long-term airport parking drive much of the work.

Sponsored

Be the auto electrician this area sees first

Reach drivers, tradies and fleet operators in this part of Townsville. See sponsor spots and prices.

How can we help?

Need it fixed?

Find a local Garbutt auto electrician for anything from a flat battery to a full fit-out.

Find an auto electrician

Buying parts?

Quality auto electrical parts from Ozautoelectrics, an established Australian supplier since 2010, dispatched through a nationwide network. For retail and trade buyers.

Shop parts

Doing it yourself?

Free step-by-step guides written for Queensland conditions, with the parts you’ll need listed for each job.

Browse DIY guides

Auto electrician in Garbutt?

Are you an auto electrical business? List your business on this site.

List your business on this site

Garbutt at a glance

  • Area: Townsville City, Townsville City
  • Neighbours: Townsville City, South Townsville, Hermit Park
  • Main roads: Duckworth Street, Woolcock Street, Ingham Road, Dalrymple Road, Coral Sea Drive
  • Typical work: fleet and work ute electrics, flat batteries after airport parking, beacons and work lights, charging system faults, accessory and service body wiring, reversing cameras

Common auto electrical jobs in Garbutt

Garbutt is only partly residential. The airport, the base and the industrial estate mean the job list leans towards vehicles that work for a living.

Flat after a trip away

Many people leave their car near the airport while they fly out for work or holidays, and come back to a battery that won't start the engine. Modern cars draw power while parked, and Townsville heat speeds up battery wear. If you travel often, have the battery load tested before a long trip and consider a portable jump starter in the boot. Our guide how to jump start a car safely covers the right order to connect leads.

Get it done: get a quoteDo it yourself: shop jump starters

Service bodies and trade utes

Workshops and depots around Duckworth Street run plenty of utes and light trucks carrying compressors, inverters, fridges and lights. Every accessory needs the right cable size, its own fuse and a sensible power source, or the result is melted wires and flat batteries. Sealed fuse blocks and Anderson plugs are worth the extra cost in humid conditions. Use what size cable do I need to work out the right gauge.

Get it done: get a quoteDo it yourself: shop fuse blocks

Beacons and site lighting

Vehicles working around airside areas, depots and industrial yards often need amber beacons, strobes or extra work lights to meet site rules. LED units draw little current and stand up to vibration. Mount them on solid brackets, run cables through grommets and give each light a fuse and a labelled switch. In the wet season, check lamp seals, because water inside a light quickly corrodes the circuit board.

Get it done: get a quoteDo it yourself: shop LED beacons

Charging faults on fleet vehicles

Fleet vehicles that idle with the air conditioning on, or run lights and radios all day, put a heavy load on the alternator. A battery light on the dash, dimming headlights at idle or batteries that keep going flat all point to the charging system. Loose belts, worn brushes and corroded alternator plugs are common causes. Our guide battery warning light on while driving explains what to do if the light appears.

Get it done: get a quoteDo it yourself: shop alternators

Garbutt auto electrical questions

Do work utes really need a dual battery or DC-DC charger?

If the ute runs a fridge, lights or tools while the engine is off, a second battery stops those loads flattening the starting battery. Many newer utes have smart alternators, so a DC-DC charger is usually the better way to charge that second battery. An auto electrician can size the system to the loads you actually run.

Can an auto electrician come to our yard in the industrial estate?

Many Townsville auto electricians do mobile work and can come to a depot or yard. That saves losing a driver and vehicle for half a day. Bigger jobs, such as full rewires or service body fit-outs, are often better done in a workshop with a hoist and good lighting, so ask when you book.

Local tip for Garbutt

If you're leaving your car near the airport for more than a week, ask whether your car has a transport or storage mode in the owner's manual, which reduces the battery drain while parked. Otherwise, consider disconnecting the negative terminal if you know your radio code and the car doesn't need power for its alarm.

Auto electricians near Garbutt

See the Townsville City listings for auto electricians and mobile services that cover Garbutt.

Advertisement

Looking for parts in Garbutt?

Need jump starters, fuse blocks, beacons or alternators for work vehicles? Order quality parts from Auto Electrical Australia, dispatched Australia-wide.

Search auto electrical parts

Searches the full range at Auto Electrical Australia, opening in a new tab. Popular: dual battery · LED light bars · trailer plugs · fuses

Nearby: Townsville City · South Townsville · Hermit Park

Auto electricians in Garbutt

Own a business listed here? Tap Claim it free next to it to add your phone, website, hours and photos. Not listed yet? Use the claim form and we’ll add you.

Mobile services that cover Garbutt

These businesses come to you and say they service Garbutt.

Is your business missing? Tell us and we’ll add it free.

Run an auto electrical business in Garbutt?